Earthing Grounded Silver Sleep Pad Large Replacement

Replacement Pad Only. Does NOT include any cords or accessories.


The Large Earthing® Grounded Sleep Pad can be placed over or under your fitted sheet and secured with the two elastic bands under the mattress. Fits full, queen, and king mattresses.

$169.99

Select an adapter / checker kit for your product

  • Outlet Adapter Australia ($8.99)

  • Outlet Adapter Danish ($8.99)

  • Outlet Adapter Europe ($8.99)

  • Outlet Adapter Italy ($8.99)

  • Outlet Adapter UK ($8.99)

  • Outlet Checker Australia - Type I ($11.99)

  • Outlet Checker Danish - Type K ($11.99)

  • Outlet Checker Europe - Type F ($11.99)

  • Outlet Checker UK - Type G ($11.99)

  • Outlet Checker USA ($6.99)

  • No Adapter Needed

Share:
Product Code: EGSSPLR | Available: 40
  • 1 Grounded Silver Plush Pad Large 54" by 72"

  • Silver Side - 99% silver conductive fabric on the surface area is made of 50% Silver Plated Nylon and 50% Polyester dipped in silver ....   Reversed Side 100% Polyester.

    Due to the nature of silver, our 99% pure silver products will discolor with use.
    It’s normal to have fading or discoloration spots after use and washing. 
    This is the inherent nature of silver. The product will still function exactly the same.

  • Due to the nature of silver, our 99% pure silver products will discolor with use.
    It’s normal to have fading or discoloration spots after use and washing. 
    This is the inherent nature of silver. The product will still function exactly the same.

     

    Step 1: Check Your Outlets For Ground

    In order to use your Earthing product, you must connect it to the “ground port” of a grounded 3 prong outlet. Before plugging in your Earthing product, you must check that the outlet is grounded by plugging in the outlet checker.

    Two amber lights illuminated is GOOD and means that you have a proper ground and you are ready to connect your Earthing product.

    Any other light combination means your outlet is NOT properly grounded. Try testing another outlet. If it still doesn’t work, then you will need to use a grounding rod in the optional step 2.

     

    Step 2: (Optional) Using The Ground Rod When Outlets Aren't Grounded

    1. First Push the Ground Rod directly into the earth(8" to 10") close to the foundation of the building.

    2. Run the cord from the Ground Rod, under or around a window or door, near where you will be using your product.

    3. Make sure to cover the cord to prevent tripping. 

    4. Plug the prong end of your cord into the receptical end of the Ground Rod cord. If you live in a dry area, such as a desert, soak the earth around the Ground Rod from time to time for maximum conductivity.

     

    Step 3: Setting Up The Silver Plush Pad

    1.Snap the cord onto the connection tab of your Earthing®Grounded Sleep Pad.

    2. The Earthing®Grounded Sleep Pad can be placed over your fitted sheet or under your fitted sheet. It’s secured with the two elastic bands

    under the mattress.

    3. Insert the end of your Earthing® Cord into the 3rd hole of a grounded wall outlet. Test your outlet and make sure it is grounded,

    4. Only the silver side of the Earthing® Grounded Sleep Pad is conductive. The earth’s energy is transferred best when your bare skin is in contact with

    the pad, but it also can be used with sleepwear. It just takes several minutes to make the connection.

     

    Step 5: How To Test For Conductivity With The Continuity Tester

    Not All Products Come Standard With a Continutiy Tester.  (Purchase The Tester Here)

    The purpose of the tester is to verify that your Earthing Plush Pad is conductive. It contains two replaceable batteries.

    1. Insert prong end of splitter into grounded outlet or ground rod cord.

    2. Plug Earthing cord from sheet into one of the two splitter receptacle ends.

    3. Insert prong end of tester cord into the other splitter receptacle.

    4. Place product tester flat on the pad. The round metal plate must be in contact with surface of the pad. Press firmly on the pad to obtain a good contact. A green light means that pad is in working order. In unlikely case that no green light comes on, the pad may be defective or has lost conductivity and should be replaced. Sometimes, people have difficulty testing their products. If the light doesn’t come on, place one hand on the pad while holding the tester in the other hand and with one finger on the silver button on back of tester. A green light would show that the body is grounded when touching the pad.  Make sure that both the tester and the pad are plugged in to the ground, as described above. The reason for perhaps the light not going on: you aren't pressing hard enough on the tester. The surface fabric of the pad sometimes prevents the button from contacting the conductive silver fibers of the pad. The surface seems smooth, but if you were to look at it with a microscope you would see "hills and valleys." The pliant surface of the skin, unlike the hard metal button, will bend around fibers and make good contact. You can also put some moisture on your finger tips to create a better contact.

    5. Disconnect splitter from the ground connection, then disconnect cords from the splitter.

    6. Re-insert Earthing cord from sheet into ground connection.

    7. You don’t have to test your sheet often. Perhaps after cleaning. The more you use the tester, the sooner the batteries in the tester will expire.

     

    Step 6: How To Wash and Care For Your Earthing Silver Plush Pad

    CARE INSTRUCTIONS

    DO:

    Wash weekly in a washing machine with warm water.

    Wash with towels or linens for optimal silver shine.

    Use a liquid laundry detergent.

    Dry in a dryer on low or line dry

     

    DON’T:

    Don't wash with bleach or fabric softeners

    Don’t use whitening detergents, oxi-detergents OR detergents with oils like lavender or coconut oil

    Don't use dryer sheets

    Absolutely No Dry Cleaning

     

    Bleach, body lotions and oils can tarnish the silver thread rendering it non conductive. Fabric softener builds up on the silver and alsoruins its conductive properties.

    It is advised to wait one hour to use the product after applying lotion to the skin. Iron using low heat.

Product Reviews