Ground Therapy Zero Gravity Recliner

Welcome to your new favorite lounge chair! The Ground Therapy Zero Gravity Recliner is completely upholstered in our conductive carbon tech material, offering a unique head-to-toe grounding experience. De-stress after your workday by sitting in your recliner, setting it to zero gravity position, and feel your fatigue and inflammation melt away. Pair with the Ground Therapy Throw for an immersive grounding experience like no other. May recline to any position, and also includes vibration massage and heat features.

Dimensions: 40.5 x 30.5 x 49 in (L x W x H) Reclined: 63 in.

Weight Capacity: 400 pounds

  • 1 Ground Therapy Zero Gravity Recliner
  • 1 Coil Cord
  • 1 Outlet checker
  • 1 U.S Safety Adapter
  • 1 User’s guide

The thin black conductive material that your body makes contact with. It is made of PU (Polyurethane) resin. Leather look-alike items made with polyurethane (PU) are very consumer friendly and safe unlike older PVC leathers. Our PU Leather is vinyl free, and phthalate free.

The thin black layer of PU leather is infused with conductive carbon pigment for the conductive top layer. Carbon is the 2nd most abundant element in the human body after oxygen. The carbon is what conducts the earths energy. It also makes the leather flame resistant naturally without the use of harsh flame resistant chemicals. The PU Leather would not be conductive without the addition of carbon.

We’ve sourced eco-friendly and non-toxic materials to provide our customers with a safe and premium quality grounding product.

Step 1: Check Your Outlets For Ground

In order to use your Earthing product, you must connect it to the “ground port” of a grounded 3 prong outlet. Before plugging in your Earthing product, you must check that the outlet is grounded by plugging in the outlet checker.

Two amber lights illuminated is GOOD and means that you have a proper ground and you are ready to connect your Earthing product.

Any other light combination means your outlet is NOT properly grounded. Try testing another outlet. If it still doesn’t work, then you will need to use a grounding rod in the optional step 2.


Step 2: (Optional) Using The Ground Rod When Outlets Aren't Grounded

1. First Push the Ground Rod directly into the earth(8" to 10") close to the foundation of the building.

2. Run the cord from the Ground Rod, under or around a window or door, near where you will be using your product.

3. Make sure to cover the cord to prevent tripping. 

4. Plug the prong end of your cord into the receptical end of the Ground Rod cord. If you live in a dry area, such as a desert, soak the earth around the Ground Rod from time to time for maximum conductivity.


Step 3: Setting Up The Ground Therapy Zero Gravity Recliner

1. Position your Recliner in its desired location, in reach of a grounded outlet.

2. The Recliner comes with the back in the folded position. Simply locate the pins on the back right above the fold, pull them into the up position, pull the back of the recliner into the upright position and then drop the pins into their holders, securing the back in place

3. Attach snap end of Earthing cord to snap nub on the recliner, located on the lower back flap of the recliner.

4. Insert prong end of Earthing cord into ground port (third hole) of nearest grounded electrical outlet on wall, or into Earthing ground rod cord if you use a ground rod connection.

5. Plug the cord for the recliner motor into the outlet, this has no effect on the grounding of the recliner.


Step 4: How To Test For Conductivity With The Continuity Tester

Not All Products Come Standard With a Continuity Tester. 

The purpose of the tester is to verify that your Earthing Product is conductive. It contains two replaceable batteries.

1. Insert Safe T Cube into grounded outlet or ground rod cord.

2. Plug Earthing cord from mat into one of the two Safe T Cube Ports.

3. Insert prong end of tester cord into the other Safe T Cube port.

4. Place product tester flat on the Chair. The round metal plate must be in contact with the black material on the chair. Press firmly on the chair to obtain a good contact. A green light means that mat is in working order. In unlikely case that no green light comes on, the mat may be defective or has lost conductivity and should be replaced. Sometimes, people have difficulty testing their chair. If the light doesn’t come on, place one hand on the mat while holding the tester in the other hand and with one finger on the silver button on back of tester. A green light would show that the body is grounded when touching the chair. Make sure that both the tester and the mat are plugged in to the ground, as described above. The reason for perhaps the light not going on: you aren't pressing hard enough on the tester. The surface fabric of the chair sometimes prevents the button from contacting the conductive  fibers of the material. The surface seems smooth, but if you were to look at it with a microscope you would see "hills and valleys." The pliant surface of the skin, unlike the hard metal button, will bend around fibers and make good contact. You can also put some moisture on your finger tips to create a better contact.

5. Disconnect tester from the ground connection, then disconnect the tester cord from the Safe T Cube.

6. You don’t have to test your chair often. Perhaps after cleaning. The more you use the tester, the sooner the batteries in the tester will expire.


Liquid error: include usage is not allowed in this context