Coupon Code: BLUEFREE

0.0 star rating Write a review

IMPORTANT!

1) Add this bundle to your cart after adding $700 in product.
2) Use coupon code BLUEFREE at checkout

$294.97 Value!

Includes:

  • 6 Bags of Earthing Patches (180 total patches)
  • Ground Therapy Bag
  • Earthing Sticky Mat
  • Earthing Half Sheet
  • 3 Orange Coil Cords
  • 3 Safe T Cubes

 

 

Step 1: How To Get Started

In order to use your Earthing product, you must connect it to the “ground port” of a grounded 3 prong outlet. Before plugging in your patch, you must check that the outlet is grounded by plugging in the outlet check, supplied.

 

Step 2: Test Your Outlet

In order to use your patches, you must connect it to the “ground port” of a grounded 3 prong outlet. Before plugging it in, you must check that the outlet is grounded by plugging in the outlet checker.

2 AMBER LIGHTS illuminated is GOOD and means that you have a proper ground and you are ready to connect your Earthing product.

OTHER LIGHT COMBINATIONS means your outlet is NOT properly grounded. Try testing another outlet. If it still doesn’t work, then you will need to use a grounding rod. You can order one at Earthing.com.

 

Step 3: (Optional) Using The Ground Rod When Outlets Aren't Grounded

First Push the Ground Rod directly into the earth(8" to 10") close to the foundation of the building.

Run the cord from the Ground Rod, under or around a window or door, near where you will be using your product.

Make sure to cover the cord to prevent tripping.

Plug the prong end of your cord into the receptacle end of the Ground Rod cord. If you live in a dry area, such as a desert, soak the earth around the Ground Rod from time to time for maximum conductivity.

 

Step 4: Using Your Patches

1. The Patches can be applied to any part of the body for targeted pain relief. Or they can be applied to the palms of the hands or bottom of the feet as these are the most conductive point on the body.

2. Snap the cord onto the Patch connection tab.

3. Insert the end of your Earthing Cord into the 3rd hole of a grounded wall outlet.

4. Ensure the patch is securely adhered to the skin.

 

Step 5: Setting Up The Sticky Mat

1. The Sticky Mat has an adhesive back with peel away paper to adhere to a carpet protecting mat.

2. To attach Sticky Mat, peel two inches of the paper slowly back. Start applying the adhesive side to the existing floor protector. Press down the first two

inches that have been peeled away and continue to slowly pull the backing paper off to expose the adhesive backing. Using one hand, slowly pull back the paper and

use the other hand to continue pressing the adhesive side against the floor mat until the entire Sticky Mat adheres.

3. Attach snap end of Earthing cord to snap nub on mat.

4. Insert prong end of Earthing cord into ground port (third hole) of nearest grounded electrical outlet on wall, or into Earthing ground rod cord if you use a ground rod connection.

4. The non-sticky side of the Sticky Mat is conductive. The Earth’s energy is transferred best when your bare skin is in contact with the pad, can

also be used with socks. It just takes several minutes to make the connection.

 

Step 6: Setting Up The Half Sheet

1. Place the half-sheet across width or length of the bed, over the bottom sheet, so that when you lie down you make bare skin contact with the half-sheet. Any part of your body will work. Many people place it across width of the bed, at the foot end, so that the lower legs and/or feet make contact.

2. Insert one end of Earthing cord into ground port of a properly grounded wall outlet (third hole) or connect to the cord of an Earthing ground rod placed in the Earth outside.

3. Snap other end of Earthing cord onto half-sheet.

4. Tuck loose ends under mattress

 

 

 

Always use as directed. The Earthing Connection Outlet Ground Checker is designed for 120V 60Hz use only! Use only Earthing® approved connecting cord with built-in internal safety feature. If your Outlet Ground Checker does not display 2 amber lights, then do not use the product before consulting an electrician.

For your safety, locate any connecting cord in such a way that it doesn’t cause a tripping hazard.

include usage is not allowed in this context